Welcome to Leader in Industrial Solution since 2005

  • (+91) 8554982251

  • sales@jayceetech.in

  • ISO-9001-2008

  • Phone Number
    (+91) 8554982251

  • Email Address

  • Global Certificate

Level Switches for Solids

Contact Us for Help

Contact with us through our representative or submit a business inquiry online.


Chute Level Switch

Technical Specification
Normal sensitivity200 gm / 400 gm
Diaphragm Membrane materialNitrial Rubber / SS
Ambient temperature60 Deg Micro switch
Contacts 15 Amp, 230 V AC, Potential free
Cable GlandPG 11
Main bodyCast Aluminium
Switching HousingPolymer for SS type
Protection for switching housin IP 67


The JAYCEEBOOT level switch is used for indicating, controlling, and regulating the level of granulated or powdered dry materials with a grain diameter up to 30 mm and a density of 0,3 to 2,5 g/cm3, flowing through a silo, hopper or chute.


The device must be mounted so that the diaphragm membrane is exposed to the product whose level should be controlled, in such a way that the product, can press the diaphragm.

The material weight presses the diaphragm which is adjusted with the micro switch through a flexible mechanism. A liver attached to the diaphragm transfers the pressure to the micro switch which changes the contact.

When the material recedes the diaphragm comes back to its normal position and the micro switch again changes the contact.


The JAYCEEBOOT consists of a micro switch inside a cast Al housing , covered by a flexible Diaphragm .

Installation and Mounting

The JAYCEEBOOT can be installed outside the container by making a hole on the wall, so that the membrane remains exposed to the product inside. Suspended by means of a tube, it can be also installed inside the container. Using adapters, it can be installed in pipes and conduits.

Wherever possible level switch should be mounted on vertical surfaces. By this means, the product can flow free downwards, and wrong indications are avoided. It can be mounted on surfaces with a slope of not more than 30 degrees from vertical, provided that the product leaves the membrane thoroughly free when flowing along.

If maximum levels are to be controlled, the devices must be mounted at such a height that the product overflowing the membrane can exert pressure on this membrane, working the micro switch.