Welcome to Leader in Industrial Solution since 2005

  • (+91) 8554982251

  • sales@jayceetech.in

  • ISO-9001-2008

  • Phone Number
    (+91) 8554982251

  • Email Address
    sales@jayceetech.in

  • Global Certificate
    ISO-9001-2008

Moisture Sensors

Contact Us for Help

Contact with us through our representative or submit a business inquiry online.

CONTACT US

Moisture Sensors for Hopper and Conveyor

moisture-sensors-for-hopper-conveyor
Technical Specifications
Construction Body: Stainless Steel
Faceplate: Ceramic
Refresh Rate: 25 times per second.
Fixing: The sensor must be placed in the flow of Material.
Bins and Silos Install in the neck of a bin or underneath the gate. Standard and Extension Mounting Sleeves are available to suit different bin widths.
Conveyors Secure in the flow of material.
Operating Temperature 0-60° C. The sensor will not measure ice.
Moisture Range The sensor will measure up to saturation of Material.
Analogue Outputs Two configurable 4-20 mA or 0-20mA current loop source available for moisture and temperature. May also be converted to 0-10V DC.
Digital Inputs/Output 2 configurable digital signals available for averaging and alarm functions.
Power Supply +15V to +30V DC, 4W.
Extension Cable Six twisted pairs, 22AWG, 0.35mm 2 conductors. Screen braid with 65% minimum coverage plus Aluminum /polyester foil. Maximum cable runs of 100 m

Features

  • Digital technology provides precise linear moisture measurement with 25 readings per second.
  • Advanced Digital Signal Processing provides a clear signal with rapid response.
  • Fully temperate compensated measurement.
  • Two analogue outputs, digital RS485 communications and configurable digital inputs/output, alarms.
  • Remote communication with Hydro-Com software allows configuration of all sensor parameters.
  • Consistent performance with no need for Recalibration except for use with different materials.
  • Calibration data points stored within the sensor for improved quality control.
  • Stand alone or simple integration into a new or existing automation system.
  • The Averaging Mode provides continuous “average” moisture over a batch.
  • Averaging, “Bin Empty” and “High Moisture” ” Alarms and Signal Processing are performed internally by the sensor.